CETAC
Worldwide leader in sample handling & sample introduction equipment for elemental analysis.
  Home  
  About Us  
  Sales  
  Literature  
  Service & Support  
  Parts  
  News & Events  
Automation Laser Ablation Nebulizers Mercury Analyzers Sample Prep
Service & Support
Service Documents

Software Tools

C-Term Serial [RS-232] Terminal Program
C-Term Users Guide
Driver Installation for the USB to RS-232 Adapter

ADX-500

ADX-500 Auto Dilutor Accessory Operator's Manual
Guide to Upgrading an ASX-510 Autosampler to Work with the ADX-500
ADX-500 Software Guide
Guide to Installing the Z-Drive on the ADX-500 and ASX-510
Guide to Installing the Z-Drive on the ADX-500
Service Bulletin: Replacement of the barbed diluent inlet fitting on the Cavro 3-way valve on the autodilutor
Service Bulletin: Stoppage of the Cavro syringe pump due to high backpressure on the autodilutor
Service Bulletin: Contamination in the syringe pump on the autodilutor

ASX-100

ASX-100 Autosampler Operator's Manual
ASX-100 Software Developer's Manual
ASX-100 Specifications
Replacing Firmware on the ASX-100 Autosampler
Communication with the ASX-100 Using HyperTerminal
Guide to Replacing the Z-drive on the ASX-100

ASX-110/112FR

ASX-110FR Operator's Manual
ASX-112FR Operator's Manual
Replacing the Z-Axis Home Sensor on an ASX-110FR or ASX-112FR Autosampler
Replacement of Z-Axis drive tubing in Cetac ASX-110/112FR Autosamplers
Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers

ASX-130

ASX-130/260/520/EXR-8 Auto Sampler Software
Developer's Manual
Guide for Installing or Replacing the Daughter Board on the CETAC ASX-130 Autosampler
Guide for Replacing the Z-Axis Peek Tubing on CETAC Autosamplers
Guide for Replacing the Main Board on the ASX-130 Autosampler
Guide to Operating a CETAC Autosampler Using HyperTerminal
Guide to Configuring a CETAC Autosampler Using HyperTerminal
Service Bulletin: Guide shaft corrosion
Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers
Guide for Installing Z-drive Assembly
Guide for Installling Z-drive Nylon Cable

ASX-260

ASX-260 Autosampler Operator's Manual
ASX-130/260/520/EXR-8 Auto Sampler Software
Developer's Manual
Guide for Upgrading the Firmware on the ASX-260 Autosampler
Guide to Replacing the Y-Axis Sensor Board on the ASX-260 Autosampler
Guide for Replacing the Z-Axis Peek Tubing on CETAC Autosamplers
Guide to Operating a CETAC Autosampler Using HyperTerminal
Guide to Configuring a CETAC Autosampler Using HyperTerminal
Service Bulletin: Autosampler Power Connector Defective
Service Bulletin: Guide shaft corrosion
Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers
Guide for Installing Z-drive Assembly
Guide for Installling Z-drive Nylon Cable

ASX-500/510

ASX-510 End-of-Life Notice
ASX-500 Model 510 Auto Operator's Manual
ASX-510 Service Manual
Guide to Aligning the ASX-510 Autosampler
Guide to Replacing the CPU Board on the ASX-510 Autosampler
Guide to Adding a Daughter Board on the ASX-510 Autosampler
Guide to Replacing the Firmware on the ASX-510 Autosampler
Guide to Removing the Wiper on the ASX-510 Autosampler
Guide to Replacing the Y-Axis Leadscrew on the ASX-510 Autosampler
Guide to Replacing the Y-Axis Sensor Board on the ASX-510 Autosampler
Guide to Communication with the ASX-510 Autosampler Using HyperTerminal
Guide to Replacing the Pump (SP5211) on the ASX-510 Autosampler
Guide to Replacing the Main Board and Pump (SP5220) on the ASX-510 Autosampler
Guide to Replacing the Main Board (SP5220A) on the ASX-510 Autosampler
Guide to Replacing the X-Leadscrew and Guideshaft on the ASX-510 Autosampler
Guide to Converting the Push/Pull Z-Drive on the ASX-510 Autosampler
Guide to Installing the Z-Drive on the ADX-500 and ASX-510
Guide for Replacing the Z-Axis Peek Tubing on CETAC Autosamplers
Service Bulletin: Z drive assembly replacement on ASX-500
Service Bulletin: Modification of ASX-500 home location flag
Service Bulletin: Drivers for the CETAC autosamplers removed from the Evolution software in versions prior to 3.22A

ASX-520/ASX-520HS

ASX-130/260/520/EXR-8 Auto Sampler Software
Developer's Manual
Service Bulletin: Daughter Board replacement for
Cetac ASX-520/ASX-520HS Autosamplers
Service Bulletin: Main Board replacement for
Cetac ASX-520/ASX-520HS Autosamplers
Service Bulletin: Pump replacement for
ASX-520/ASX-520HS (SP7002A)
Guide to Upgrading the Firmware in a Cetac ASX-520/520HS Autosampler
Guide to Installing the Splash guard
and two piece shield on the ASX-520
and ASX-520HS Autosamplers
Service Bulletin: ASX-520 Two Piece Shield & Splash Guard
Service Bulletin: Automation Systems Pumps
ASX-520 Autosampler Operator's Manual
Guide to Aligning the ASX-520 Autosampler
Guide to Replacing the Main Board on the ASX-520 and ASX-520HS Autosamplers
Guide to Replacing the Y-Axis Sensor Board on the ASX-520 and ASX-520HS Autosamplers
Guide for Replacing the Z-Axis Peek Tubing on CETAC Autosamplers
Guide for replacing the Y-Axis Leadscrew on ASX-510 and ASX-520 Autosamplers
Guide to Operating a CETAC Autosampler Using HyperTerminal
Guide to Configuring a CETAC Autosampler Using HyperTerminal
Guide to Using the Z-Drive Speed Override Tool for ASX-520HS Autosamplers
Guide to Setting the Dip Switch for ASX-520HS Autosamplers
Guide to Changing the Rinse Pump Speed on the ASX-520 and ASX-520HS Autosamplers
Guide to Replacing the X-axis drive belt on the ASX-520 Autosampler
Service Bulletin: Elimination of "splashing" in high-speed autosamplers
Service Bulletin: Autosampler X-Axis Sensor Board Replacement
Service Bulletin: Autosampler Main Board Replacement
Service Bulletin: Autosampler Power Connector Defective
Service Bulletin: Guide shaft corrosion
Service Bulletin: Sipper depth off by 10% in the vertical direction
Service Bulletin: Replacement of X-axis drive belt
Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers
Guide for Installing Z-drive Assembly
Guide for Installling Z-drive Nylon Cable

ASX-1400/1600/1600

Guide to ASX-1x00 Firmware Upgrade
ASX-1000 Series Drip Cup Spring & Washer Replacement
APS-1650 Level Sensor Installation and Calibration
Guide to Configuring a CETAC 1xxx Series
Autosampler Using HyperTerminal
Guide for Replacing Peristaltic Pump (SP7002A) in Cetac Autosamplers

ASXPRESS™

Installation Guide
ASXPRESS™ 6-Port Valve Retraining
Configuring Autosampler Firmware Personalities
Driver Installation for the USB to RS-232 Adapter

ASXPRESS® PLUS

Installation Guide
CETAC EXR-8 Installation Guide
Perkin Elmer S-10/AS-93 Installation Guide
ASXPRESS™ 6-Port Valve Retraining
Configuring ASXPRESS® PLUS Firmware Personalities
Driver Installation for the USB to RS-232 Adapter
Rinse connections for an ASX-1400/1600/1600 autosampler
Upgrading Firmware for the ASXPRESS® PLUS

ENC-500

Install Guide
Service Bulletin: Scratching and superficial cracking of enclosure due to cleaning chemicals.

EXR-8

Install Guide
ASX-130/260/520/EXR-8 Auto Sampler Software
Developer's Manual
Guide to Upgrading the ASX-500/510 for use with the EXR-8
Guide to Upgrading the ASX-520/HS for use with the EXR-8
Guide to Operating a CETAC Autosampler Using HyperTerminal
Guide to Configuring a CETAC Autosampler Using HyperTerminal
Guide to Communicating with an Extended Rack (EXR-8) Autosampler Using HyperTerminal
Guide for Replacing the Z-Axis Peek Tubing on CETAC Autosamplers
Guide for Installing Z-drive Assembly
Guide for Installling Z-drive Nylon Cable
Guide for Installling Extended Rack Autosampler Bracket Upgrade Kit

SDS-550

SDS-550 Sample Dilution Operator's Manual
SDS-550 Sample Dilution Software Manual

All CETAC's service bulletins & guides are in PDF format and require Abobe Acrobat to view.
(Download Acrobat Viewer)

Order Spare Parts